Fig. 45: Paravan Knurled Screws; Fig. 46: Paravan Rear And Side Trim - Paravan WHEELCHAIR Series Operating Instructions Manual

Table of Contents

The trim must first be removed to attach the Dahl Docking Station to the

Paravan wheelchair.

To remove the cover, loosen the six knurled screws ①. If a main

isolating switch is installed on the rear, the key of this switch must

first be removed ②.

Remove the rear trim ③and the side trims. The order is not important.

To open the cover of the battery box, the two front hexagonal screws

must be removed with a 10 mm spanner. The battery box can then be

tilted backwards using the hinges - be careful: the entire weight of the

superstructure rests on the lid!

Loading and transporting the power wheelchair

①

Fig. 45: Paravan knurled screws

③

②

④

Table of Contents

Pr 25