13.10
Manual driving, push mode
13.10.1 Operation of the brake lock release lever (emergency release)
>
If you want to push the power wheelchair, you must set both brake
lock release levers on the left and right drive side to "UNLOCK"
(downwards).
>
CAUTION: In push mode, the control panel must be switched off in
order to prevent damage to the motors and the control panel.
L
Do not set to "UNLOCK" on a gradient! In this position, the drive
motor is unable to brake!
Positions of the brake lock release lever
LOCK
>
Move the lever upwards
UNLOCK
>
Push the lever downwards
72
Braking system is active!
→
Braking system is deactivated!
→
Fig. 31: Brake lock release lever (emergency
release)
Driving with the power wheelchair