Download Print this page

JRC JAN-7201S Instruction Manual page 70

Simple ecdis
Hide thumbs Also See for JAN-7201S:

Advertisement

Setting item
Select a heading sensor source from the combo box.
Heading
* The sources that can be selected vary according to
the installation.
* When GyroSW is enabled, only Gryo and MAN can
be selected.
When the Gyro Compass system that is used has the
automatic switching function, the sensor source display
is switched automatically according to the switching
condition.
When the sensor source is set to [MAN], the ship's
heading value can also be input in the input box.
Ship's heading value input range: 0.0-359.9°
Select a Speed Through Water sensor source from the
STW (Speed
combo box.
Through Water)
* The source that can be selected varies depending on
the installation
* When 1AX is installed in Log, Log cannot be selected
from the sensor source.
When the sensor source is set to [Manual], a Speed
Through Water can also be input in the input box.
Speed Through Water value input range: -99.9-99.9kn
Select Course Over the Ground/Speed Over the
COG/SOG
Ground sensor source from the combo box.
(Course Over the
*The source that can be selected varies depending on
Ground/Speed
the installation
Over the Ground)
When GPS is selected for Position, the same GPS is
selected automatically.
Select a sensor source to be used for time correction of
Time (Time
this equipment from the combo box.
correction)
*The source that can be selected varies depending on
the installation
Select a water depth sensor source from the combo
Depth (Water
box.
depth)
*The source that can be selected varies depending on
the installation
*1: When Echo Sounder 1 and Echo Sounder 2 are installed as depth sensor sources, E/S1 (AUTO)
and E/S2 (AUTO) are displayed instead of AUTO.
[3] Disclosure button
When clicked, the left pane is hidden.
Memo
When Log Selector is installed and the Log (speed) sensor is switched automatically, a popup
window is displayed, notifying the effect.
Section 19 Maintenance & Inspection
Setting contents
19-12
Setting value
MAN, Gyro x, MAG,
G/C
("x" indicates the unit
number)
MAN, Logx
("x" indicates the unit
number)
Log x, GPS
("x" indicates the unit
number)
GPS, Ship Clock
FWD, AFT, MID,
1
AUTO*

Advertisement

loading

This manual is also suitable for:

Jan-9201s