Advertisement
19.10.2 Restoring backed up data
Use the following procedure to restore backed up data into this equipment.
Connect the external medium (USB memory, etc.) in which backup data has been saved.
1
Press the power supply button of the operation unit.
The power supply button is lit. Then the task menu is displayed.
2
Click on the [Data Backup/Restore] button in the task menu.
The [Backup/Restore] dialog is displayed.
3
Click on the [Data Restore] tab.
4
Select the drive in which backup data has been saved from the drive selection combo
box.
5
Select the type of the data to be restored in the [Data Type] combo box.
All: The entire user data is restored.
Except Charts: The user data excluding chart data is restored.
Section 19 Maintenance & Inspection
[Start] button
19-46
Drive selection combo box[3]
[Data Type] combo box
Advertisement
