Advertisement
Message
Stbd Main Propeller(not
plausible)
Stbd Main
Propeller(unavailable)
Stern Thruster #n
(invalid)
Stern Thruster #n (not
plausible)
Stern Thruster #n
(unavailable)
STW Speed(invalid)
STW
Speed(unavailable)
Time(invalid)
Time(unavailable)
TXRX(AZI)
TXRX(Communication
error)
TXRX(DRV AC LKV)
Explanation
There is a range error of
the data.
The data cannot be
received.
There is a format error or
a status error of the data.
There is a range error of
the data.
The data cannot be
received.
There is a format error or
a status error of the STW
data.
The STW data cannot be
received.
There is a format error or
a status error of the Time
data.
The Time data cannot be
received.
Azimuth signals cannot be
recognized in the radar
antenna.
There is a communication
error with radar antenna.
The supply voltage of the
motor driver circuit in the
radar antenna falls short
of the rated value.
A-37
Appendix A Alert, Maintenance INFO and Permanent information
Advice
Check the sensor condition.
Check the condition of the sensor and the
communication path.
Check the sensor condition.
Check the sensor condition.
Check the condition of the sensor and the
communication path.
Check the sensor condition. Switch to a
sensor in good condition, if available.
Check the condition of the sensor and the
communication path. Switch to a sensor in
good condition, if available.
Check the sensor condition. Switch to a
sensor in good condition, if available.
Check the condition of the sensor and the
communication path. Switch to a sensor in
good condition, if available.
Confirm that the status is standby and, if the
status is transmitting, set the status to
standby.
After that, set the status to transmitting again.
If it cannot be recovered in this transmitting
state, visually confirm that the antenna of
radar antenna is rotating in a proper way.
If the rotation of the antenna has been able to
be confirmed, turn off the power of the device
and, after confirming cable connection of the
encoder in the radar antenna, turn the power
on again.
If it cannot be recovered after the operation
above, turn off the device and contact the
distributor.
Confirm that the setting of the instruction
machine is Master.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Turn off the power of the device and check the
connection of the equipment cable.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.
Turn off the power of the device if it is
equipped and check the AC power voltage
provided to the radar antenna and the DIP
switch setting of the motor driver circuit.
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
APP A
23
24
25
Advertisement
