Advertisement
Message
IAS(Communication
failed, Main LAN)
IAS(Communication
failed, Sub LAN)
ISW(Communication
error)
Joystick(Communication
Failed, MainLAN)
Joystick(Communication
Failed, SubLAN)
LCD Fan #n(LCD)
LCD High TEMP
Log #n (Communication
failed, Direct)
Log #n (Communication
failed, GIF-Direct)
Log #n (Communication
failed, GIF-Main LAN)
Appendix A Alert, Maintenance INFO and Permanent information
Explanation
Communication with IAS
cannot be performed via
Main LAN.
Communication with IAS
cannot be performed via
Sub LAN.
There is a communication
error with ISW.
A communication error
with MJS via Main LAN
was detected.
A communication error
with MJS via Sub LAN
was detected.
The fan in the display unit
has stopped.
The temperature of LCD is
too high. It will be dim or
dark.
Communication with Log
#n cannot be performed
via Serial.
Communication with Log
#n cannot be performed
via Serial.
Communication with Log
#n cannot be performed
via Main LAN.
Advice
Check the condition of IAS and Main LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check the condition of IAS and Sub LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check MJS.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check MJS.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Restart the power.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.
Turn off the power of the device and restart
after ten minutes.
If it cannot be recovered, turn off the device
and contact the distributor.
Check the condition of Log #n and Serial.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check the condition of Log #n, GIF and
Serial.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
Check the condition of Log #n, GIF and Main
LAN.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.
A-30
Advertisement
