Figure 71. Cabling diagram of configuration 12 - BOSS-N1 card and COM port
Table 81. Cable routing - BOSS-N1 card and COM port
From
J_PWR_1 (power connector on BOSS-N1)
J_PCIE_1 (signal connector on BOSS-N1)
Serial COM port
System memory
System memory guidelines
The PowerEdge HS5620 system supports DDR5 registered DIMMs (RDIMMs). System memory holds the instructions that are
executed by the processor.
Your system contains 16 memory sockets organized into 8 channels per processor.
Memory channels are organized as follows:
Table 82. Memory channels
Processor
Channel A
Processor 1
A1
Processor 2
B1
108
Installing and removing system components
Channel B
Channel C
A7
A3
B7
B3
To
BOSS_PWR (BOSS power connector on system board)
SL10_PCH_PA5 (signal connector on system board)
REAR_SERIAL (serial COM port on system board)
Channel D
Channel E
A5
A4
B5
B4
Channel F
Channel G
A6
A2
B6
B2
Channel H
A8
B8