Stats Mode - Henny Penny AHC-993 Technical Manual

2-3. STATS MODE

Feb. 2011
Press and hold until "L-2 LEVEL 2", followed by,
"CLOCK SET", shows in display.
Press 4 times and "STATS", followed by, "ENTER
CODE" shows in display.
Enter code,
the following items: (Use hidden buttons, see Section 3-3.)
ST-1 Power live hours
ST-2 Power 'on' hours
ST-3 Power-ups count
ST-4 Errors count
ST-5 Air heat 'on' hours
ST-6 Water heater 'on' hours
ST-7 Circulation fan 'on' hours
ST-8 Water solenoid on hours
ST-9 Solenoid cycle count
ST-10 Longest solenoid on time; max.=5 minutes
ST-11 Vent motor
ST-12 Highest air temperature
ST-13 Highest water heater temperature
ST-14 Factory Use
ST-15 Highest humidity value
ST-16 Highest CPU temperature
ST-17 Water heater (too hot) cycle count
ST-18 Sys ram – fade count
ST-19 Hold ram – fade count
ST-20 Stat ram – fade count
ST-21 Ram data error count
ST-22 Data total loss count
ST-23 User init's count
ST-24 Auto init's count
ST-25 Error log
ST-26 Power-up log
ST-27 Factory Use
ST-28 Reset all stats
moves you forward through the above selections and
moves you backwards through the selections.
2-5
Model AHC-990/993
to access