Introduction
Congratulations on your purchase of the Relay Panel Mains Feed. This panel offers flexible
power control with a small footprint, low heat dissipation, and low noise, allowing it to be
installed in a variety of locations.
Features of the ERP include:
Built-in preset, and DMX controls
•
Built-in network interface provides control via streaming ACN (sACN)
•
Control for up to 24 relays or 300W phase adaptive dimmers
•
Optional main breaker
•
120V (1Ø available), 240V, and 277V
•
Option cards allow for DALI control, 0–10V control, and contact closure input
•
UL924 listed emergency dry contact input suitable for connection to external emergency
•
systems
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed
including the following:
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
Do not use outdoors.
•
Do not let power supply cords touch hot surfaces.
•
Do not mount near gas or electric heaters.
•
Equipment should be mounted in locations and at heights where it will not readily be
•
subjected to tampering by unauthorized personnel.
The use of accessory equipment not recommended by the manufacturer may cause an
•
unsafe condition.
Do not use this equipment for other than intended use.
•
SAVE THESE INSTRUCTIONS
1
Relay Panel Mains Feed Installation Manual