Final Installation; Replace Covers And Door - ETC Echo Relay Panel Mains Feed Installation Manual

Final Installation

Replace covers and door

1. Before attaching covers and the door to the relay panel, check the following:
a. When a main circuit breaker kit is installed, remove the main breaker knockout from the
top cover.
b. When the breaker panel is not fully populated with circuit breakers, install a filler plate
(part number HW6726) in each unpopulated breaker slot.
2. Using the provided screws, re-attach the front cover(s) to the unit, keeping in mind the
installation order.
a. Install the top cover first.
b. Install the bottom cover. The top edge of this piece overlaps the top cover.
c. Install the top locking door. The bottom edge of the door overlaps the bottom cover.
Final Installation and Power Up
1a
2a
1b
2c
2b
34