Table of Contents
Advertisement
5
BASIC OPERATION
■ Receiving and transmitting (Continued)
i Select an output power
( You should first select the
"HI/LO" key function.)
o Transmit
!0 Receive
i Select an
output power
16
w Turn ON the transceiver
y Select a channel
e Set the audio level
r Set the squelch level
Microphone
y Select a channel
IMPORTANT: To maximize the readability of your transmitted
signal at a receiver station, pause a second after pushing
[PTT], and then hold the microphone 5 to 10 cm from your
mouth and speak at your normal voice level.
NOTE for the Time-out Timer (TOT) function
The TOT function inhibits continuous transmission beyond
a preset time period after the transmission starts.
10 seconds before transmission is cut off, a beep sounds
to indicate the transmission will be cut off, and "TOT" is
displayed in the channel name field. You cannot transmit
again for 10 seconds after it is cut off.
Advertisement
Table of Contents
