8
DSC OPERATION
■ Sending a Distress call (Continued)
D Resending a Distress call
While waiting for an acknowledgment,
you can resend the call. (Repeat call)
q When "Waiting for ACK" is displayed,
push [Resend]
Push
You can skip Step w ~ r below if your
position and time data are valid.
In that case, go to Step t.
w Select "Position," then push [ENT].
• The position entry screen is displayed.
38
e Enter your position and time data.
• See page 31 for entering details.
r After entering, select "Finish," and
then push [ENT].
t Lift up the key cover, then hold down
[DISTRESS] until "Retransmitting" is
.
displayed to resend the call.
• While holding down [DISTRESS], count
down beeps sound and both the key
and display backlighting blink.
Push
y When the acknowledgment is
u Push any [Close]
i Hold down [PTT] to announce your
•
•
•
o Push [Home]
received:
• An alarm sounds.
• The following screen is displayed.
.
• When the BAM function (p. 20) is OFF:
Push any [Alarm OFF]
, and then
push any [Close Call RCVD Window]
situation.
to return to the
Main screen.
.
Need help?
Do you have a question about the GM600 and is the answer not in the manual?