Table of Contents
Advertisement
10
CONNECTIONS AND MAINTENANCE
■ Handset (HS-98)
Speaker
e
IMPORTANT: When using the optional HS-98
First set the "MIC Type" item to "HS-98." (p. 89) Then,
turn OFF the transceiver, and connect the HS-98. After
turning ON the transceiver again, you can use the HS-98.
q SPEAKER SWITCH
When the switch is set to the " " position:
You can hear the received audio from the internal or
external speaker.*
When the switch is set to the " " position:
Mutes the internal or external speaker* output.
• You can hear the received audio from the handset.
Put the handset into the cradle to output the received
audio from the internal or external speaker.*
98
Cradle
q
w
HS-98
The received audio is heard from:
Speaker
Status
switch
internal or external speaker*
On hook
Off hook
* Depending on the Internal Speaker setting. (p. 89)
w HANDSET CONNECTOR
Insert the connector into the [MIC CONNECTOR] on the
front panel.
e PTT SWITCH [PTT]
Hold down to transmit, release to receive.
D Connection
Insert the connector into the [MIC CONNECTOR] on the
front panel, and tighten the cable nut, as shown below.
[MIC CONNECTOR]
GM600
HS-98
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Advertisement
Table of Contents
