Icom GM600 Instruction Manual page 20

5
BASIC OPERATION
■ Selecting a channel (Continued)
TIP: After receiving a signal, or you
operate the transceiver, the transceiver
enters the Radio Telephone (RT) mode.
In the RT mode, you can make voice
communications except for the DSC
operation.
• "
" is displayed while in the RT mode.
• "
" is displayed when the RT mode
task is on hold.
• "
" or " " disappears (Returns
to the Standby mode) if no operation
occurs during the preset period of time.
(p. 82)
14
■ Setting the Call channel
You can set the Call channel with your
most often-used channel for quick recall.
q Push [MENU] to display the Menu
screen.
w Rotate [CH/ENT] to select "Settings,"
then push [ENT].
e Rotate [CH/ENT] to select "Radio,"
then push [ENT].
r Rotate [CH/ENT] to select
"Call Channel," then push [ENT].
Rotate
t Rotate [CH/ENT] to select the
desired channel to be set as the Call
+
channel, then push [ENT].
Push
Rotate
• Goes back to the previous screen, after
+
Push pushing [ENT].
y Push [MENU] to return to the Main
screen.
TIP: To confirm that your setting is
correctly set, hold down [16/C] for 1
second. (p. 13)
Rotate
+
Push
Rotate
+
Push