Icom GM600 Instruction Manual page 29

When the GM600 receives a request
for responsibility transfer from the CAM
system:
• The alert status becomes "Active –
Responsibility Transferred."
• No alarms sound.
• The alert is not displayed on the BAM
list by default.
NOTE: The GM600 can receive the
request for responsibility transfer only
while receiving a valid HBT sentence
from the CAM system.
• See page 111 for the details of the
BAM alerts that the CAM system may
apply for responsibility transfer.
D Icon and Status
The icon varies, depending on the alert's priority and status, as shown below.
Priority Icon Status
Active –
Unacknowledged
Active – Silenced
Active –
Acknowledged
Warning
Active –
Responsibility
Transferred
Rectified –
Unacknowledged
None Normal
Active
Caution
None Normal
BASIC OPERATION
Description
Alert condition is still present.
Alert not acknowledged.
Alert condition is still present.
Alert not acknowledged but audible
signals have been silenced by the
operator.
Alert condition is still present.
Alert acknowledged by the
operator.
Alert condition is still present.
A function of the BAM compliant
equipment with additional system
knowledge has taken over.
Alert condition rectified.
Alert still unacknowledged.
No alert condition present.
Alert condition is present.
No alert condition is present.
5
1
2
3
4
Audible signal
5
Yes
6
7
8
9
10
11
12
No
13
14
15
16
23