D Receiving A Test Call - Icom GM600 Instruction Manual

8
DSC OPERATION
■ Receiving DSC calls (Continued)

D Receiving a Test call

NOTE: When "Test ACK" is set to "Auto,"
the transceiver automatically replies to the
call. Both the TX and RX calls are stored in
the Transmitted and Received Call Logs.
(Default: Auto)
q When a Test call is received:
• An alarm sounds.
• The following screen is displayed.
• The backlight blinks when the BAM
function (p. 20) is OFF.
w Push any [Close]
• When the BAM function (p. 20) is
OFF: Push any [Alarm OFF]
e Select your desired action.
72
[Hold]: Holds the RX call task,
[Able]:
[Accept]: Enters the DSC Task mode.
• Rotate [CH/ENT] to view the call
contents.
r Push [Home]
Main screen.
.
TIP: See page 57 for details of
sending an acknowledgment.
.
and return to the previous
screen.
Sends an acknowledgment.
DSC Task mode
to return to the
D Receiving a Test
acknowledgment
q When a Test acknowledgment is
received:
• An alarm sounds.
• The following screen is displayed.
• When the BAM function (p. 20) is
OFF: The backlight blinks and the
popup screen is displayed.
Push any [Alarm OFF]
then push any [Close Call RCVD
Window] .
When the BAM function is OFF.
, and