D Receiving A Test Call - Icom IC-M330 Instruction Manual

D Receiving a Test call

TIP:Bydefault,theAutoACKfunctionautomatically
sendsanAcknowledgementtothecallingstation(p.42).
Ifthefunctionissetto"Manual,"thefollowingscreensare
displayed.
When a Test call is received:
• The alarm sounds for 2 minutes.
• "RCVD TEST CALL" is displayed.
1. Push to turn OFF the alarm.
ALARM OFF
2.  P ushthesoftwarekeybelowyournextoperation.
(Ignore)
IGN
• Ignores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• " " blinks continuously until you display the call message.
ABLE (Able to Comply)
• SendstheAcknowledgement"AbletoComply."
• The call is saved in the DSC Log.
(Accept)
ACPT
• Accepts the call.
•  D isplaysthereceivedcall's
information.
• The call is saved in the DSC Log.
• Push , and then push
ACK
sendaTestAcknowledgementcall.
(p.30)
• Push RESEND to resend.
NOTE:IftheAutoACKfunctionissetto"Auto,"theTest
Acknowledgementcallisautomaticallysenttothecalling
stationwhenthecallisreceived.(p.42)
7
DSC OPERATION
to
CALL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
37