D Receiving A Test Acknowledgement Call; Transmitted Call Log - Icom IC-M92D Instruction Manual

8
DSC OPERATION
D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
➥ The emergency alarm sounds for 2 minutes.
➥ "RCVD TEST ACK" pops up. The LCD backlight blinks for
2 minutes.
Push [ALARM OFF] to stop the alarm and the backlight
q
blinking.
• If you haven't pushed [ALARM OFF] within 2 minutes, the next
screen automatically appears.
Push either softkey to select a desired action.
w
[EXIT]
➥ Push to ignore the Call and return to the normal operat-
ing mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Re-
ceived Call Log.
63

Transmitted Call log

■
The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
Enter "TX CALL LOG" in the DSC CALLS menu.
q
➪ DSC Calls ➪
MENU
(Push [MENU]) (Push [p]/[q], then push [ENT].)
Push [ p] or [q] to select the desired item, then push
w
[ENT].
Push [p] or [q] to scroll the message contents.
e
To delete the displayed message, push [DEL].
r
• The confirmation screen appears, then push [OK] to delete.
Push [EXIT] to return to the normal operating mode.
t
Transmitted Call Log