Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Click
to start full screen mode and press ESC button to exit.
9.1.6 Conduct Regional Focus
You can enable the function to focus on certain area.
Steps
1. Click
to enable regional focus.
2. Drag the mouse on the live view to draw a rectangle as the desired focus area.
3. Click
to disable this function.
9.1.7 Light
Click
to turn on or turn off the illuminator.
9.1.8 Wiper
For the device that has a wiper, you can control the wiper via web browser.
Steps
1. Click
on live view page.
The wiper wipes the window one time.
9.1.9 Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Manual Lens Initialization
Click
to operate lens initialization.
Auto Lens Initialization
Go to Configuration → System → Maintenance → Lens Correction to enable this function. You
can set the arming schedule, and the device will correct lens automatically during the
configured time periods.
9.1.10 Track Manually
In live view, manually select a target for the device to track.
53