Quick Set Live View; Select The Third-Party Plug-In; Start Digital Zoom; Conduct Regional Focus - HIKVISION DS-2SE7C43C432MW-AEB User Manual

5.1.5 Quick Set Live View

It offers the quick access to the display settings, OSD, and video/audio on live view page.
Steps
1.
Click and click General to show quick setup page.
2. Set display settings, OSD, and video/audio.
- For parameter explanation and instructions of display settings, see Display Settings .
- For parameter explanation and instructions of OSD settings, see OSD .
- For parameter explanation and instructions of audio and video settings, see Video and Audio .

5.1.6 Select the Third-Party Plug-in

When the live view cannot display via certain browsers, you can change the plug-in for live view
according to the browser.
Steps
1. Click Live View.
2. Click to select the plug-in.
- When you access the device via Internet Explorer, you can select Webcomponents or
QuickTime.
- When you access the device via the other browsers, you can select Webcomponents,
QuickTime, VLC or MJPEG.

5.1.7 Start Digital Zoom

It helps to see a detailed information of any region in the image.
Steps
1. Click to enable the digital zoom.
2. In live view image, drag the mouse to select the desired region.
3. Click in the live view image to back to the original image.

5.1.8 Conduct Regional Focus

You can enable the function to focus on certain area.
Steps
1. Click to enable regional focus.
2. Drag the mouse on the live view to draw a rectangle as the desired focus area.
3. Click to disable this function.
TandemVu PTZ Camera User Manual
29