Rib section
3. Apply pull out the force at any of wheel
cap spoke in order to remove it.
10-7
4. Slacken the wheel hub nuts with the
wheel hub nut wrench.
Do not remove the hub nuts.
WARNING
Be careful notto get injured by slipping
the lug nut wrench.
5. Four jack setting points are provided:
two on each side as shown in the illustra
tion.
Set the jack at the jack setting point that
is nearest to the flat tire.
WARNING
To prevent accidental slip of the jack
and serious bodily injury;
• The jack should be use on level firm
ground whenever possible.
Place a flat and wide board under
neath the jack, if necessary, to sta
bilize the jack.