Ars Time - Panasonic KX-TD308 Installation Manual

4.5 TRS / ARS Programming
Description
Selection
Default
Programming

ARS Time

Assigns times for the four Automatic Route Selection (ARS) time
schedules. It is possible to split a day into four time zones
(maximum) so that the least expensive line is selected for that time.
According to the service hours and charges offered by your carriers,
enter the starting time of each zone.
• Day of the week: 1 (Mon) / 2 (Tue) / 3 (Wed) / 4 (Thu) /
5 (Fri) / 6 (Sat) / 7 (Sun) /
• Time schedule: A / B / C / D
• Time (hour) : 1 through 12 / Disable (no schedule)
• AM / PM
All days of the week : A – 8:00 AM; B – 5:00 PM; C – 9:00 PM;
1. Enter 313.
Display: 313 ARS TIME SET
2. Press NEXT.
Display: Day of week?
3. Enter the day of the week.
Display example: MON-A: 8:00 AM
To program another time schedule, keep pressing NEXT or PREV
until the desired time schedule is displayed.
4. Enter the hour.
To set no schedule (Disable), press SELECT and go to step 7.
If "Disable" is selected, pressing SELECT shows the previous stored
hour.
To change the current entry, press CLEAR and enter the new hour.
5. Press to select AM / PM.
6. Press SELECT for AM or PM.
7. Press STORE.
8. To program another time schedule, keep pressing NEXT or
PREV until the desired time schedule is displayed.
9. Repeat steps 4 through 8.
10. Press END.
D – Disable
System Programming
313
(all days)
4-83