Installing The Devices - Phoenix Contact FL SWITCH 2000 Series Installation And Startup Manual

108997_en_04
3.4.4

Installing the devices

3.4.4.1 Selecting the conductors
The devices are supplied with a Push-in connector.
Observe the specifications for suitable conductors:
Table 3-11 Selecting the conductors
Conductor cross-section, rigid, minimum
Conductor cross-section, rigid, maximum
Conductor cross-section, flexible, minimum
Conductor cross-section, flexible, maximum
Conductor cross-section, flexible, with ferrule without plastic sleeve,
minimum
Conductor cross-section, flexible, with ferrule without plastic sleeve,
maximum
Conductor cross-section, flexible, with ferrule with plastic sleeve, minimum
Conductor cross-section, flexible, with ferrule with plastic sleeve, maximum 1.5 mm
Conductor cross-section, AWG, minimum
Conductor cross-section, AWG, maximum
Stripping length
Mounting and installation
0.2 mm
1.5 mm
0.2 mm
2.5 mm
0.25 mm
1.5 mm
0.25 mm
24
16
10 mm
33 / 226
PHOENIX CONTACT
2
2
2
2
2
2
2
2