Fl Switch 2708 Pn - Phoenix Contact FL SWITCH 2000 Series Installation And Startup Manual

FL SWITCH 2000 / FL NAT 2000
Conformity with EMC directives
Electromagnetic compatibility
Conducted noise emission
Interference emission
Immunity to burst
Immunity to EF
Immunity to ESD
Immunity to surge
Immunity to conducted interference
Ordering data
Order designation
Order No.
Pcs./Pkt.
Dimensions (nominal sizes in mm)
Width
Height
Depth
Ambient conditions
Degree of protection
Protection class
Ambient temperature (operation)
Ambient temperature (storage/transport)
Permissible humidity (operation)
Permissible humidity (storage/transport)
Air pressure (operation)
Air pressure (storage/transport)
Free from substances that could impair the application of
coating
General data
Mounting type
Type AX
Weight
Housing material
210 / 226
PHOENIX CONTACT
5.64

FL SWITCH 2708 PN

Conformance with EMC Directive 2014/30/EU
EN 61000-6-3 (conducted emissions) Class B
EN 61000-6-3 (conducted emissions) Class B
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion
A
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
FL SWITCH 2708 PN
1106610
1
60 mm
226 mm
46 mm
IP65/IP66/IP67
III (VDE 0106)
-40 °C ... 70 °C
-40 °C ... 85 °C
5 % ... 95 %
5 % ... 95 %
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without
derating)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without
derating)
Yes
Wall mounting
Stand-alone
1150 g
Zinc die-cast
108997_en_04