Fl Nat 2Xxx Device Versions; Description Of Ethernet Interfaces - Phoenix Contact FL SWITCH 2000 Series Installation And Startup Manual

Order designation
FL SWITCH 2514-2SFP
FL SWITCH 2514-2SFP PN
FL SWITCH 2512-2GC-2SFP
FL SWITCH 2608
FL SWITCH 2608 PN
FL SWITCH 2708
FL SWITCH 2708 PN
Table 2-1 Device versions
Order designation
FL NAT 2008
FL NAT 2208
FL NAT 2304-2GC-2SFP
108997_en_04
Pre-configuration in
factory default state
PROFINET mode
PROFINET mode
PROFINET mode
2.1.2

FL NAT 2xxx device versions

Copper ports
10/100 Mbps
8 x RJ45
8 x RJ45
2.1.3

Description of Ethernet interfaces

The properties of the Ethernet interfaces of the FL SWITCH 2000 and FL NAT 2000 product
families described below all meet the requirements of the IE 802.3 specification.
Copper ports:
– TX ports (RJ45), 10/100 Mbps (versions 20xx, 22xx, 24xx)
– TX ports (RJ45), 10/100/1000 Mbps (versions 21xx, 23xx, 25xx)
– TX ports (M12), 10/100 Mbps (versions 26xx)
– TX ports (M12), 10/100/1000 Mbps (versions 27xx)
Fiberglass ports:
– FO ports (ST duplex, SC duplex), 100 Mbps (versions 22xx)
– SFP ports (SFX), 100 Mbps (versions 22xx, 24xx)
– SFP ports (SFP), 100/1000 Mbps (versions 23xx, 25xx)
Copper ports
10/100 10/100/1000
Mbps Mbps
14 x RJ45
14 x RJ45
12 x RJ45
8 x M12
(D-coded)
8 x M12
(D-coded)
8 x M12
(X-coded)
8 x M12
(X-coded)
10/100/1000 Mbps
4 x RJ45
Properties of the devices
Fiberglass ports
100
Mbps
Fiberglass ports
100 Mbps 100/1000 Mbps
2 x combo, 2 x SFP
PHOENIX CONTACT
100/1000
Mbps
2 x SFP
2 x SFP
2 x combo,
2 x SFP
11 / 226