Concluding Steps - Fujitsu PRIMERGY CX2550 M2 Upgrade And Maintenance Manual

7.2.3

Concluding steps

Perform the following procedures:
"Installing the memory slot air ducts" on page 49
Ê
Ê Connect the SATA cable(s) to the connectors on the system board described
in section "Cabling for HDD 2.5"" on page 208
described in section
Controller" on page
Ê Identify the correct memory slot according to the mounting order described
in section "Memory sequence" on page
"Installing the server node in the server enclosure" on page 50
Ê
Ê If applicable, reconnect all external cables.
"Controls and indicators on the server node" on page 51
Ê
"Updating or recovering the system board BIOS and iRMC" on page 61
Ê
applicable)
"Verifying the memory mode" on page 74
Ê
"Resetting the error status after replacing memory modules or processors"
Ê
on page 86
CX2550 M2
"Cabling onboard" on page 208
209.
Upgrade and Maintenance Manual
and reroute the cables as
or "Cabling with RAID-
118.
(if applicable)
Main memory
(if
123