Table of Contents
Advertisement
2.4.2. Generation or output functions
28
a) Output type configuration
Press the button OUTPUT, select through of menu the type of signal to be generated and use the electrical
bornes correspondents (see figure 20 – Output Connections or press the button HELP).
For change the output value, press on the number and type the desired value in the keyboard.
Another way to change the output value is modify each digit separately, in fixed steps. To this, keep pressed
the output value for at least 3 seconds, choose the digit you desired changing (the digit selected is indicated with the
arrow
and
), and press the buttons
the output value for at least 3 seconds.
Fig. 18 - Output Type Selection
and
for changing the setpoint. For go out this edit mode, keep pressed
Advertisement
Table of Contents
