2.7.3. Visualizing results
67
After a task has been performed, it remains saved in the calibrator.
To view the results of a calibration in the PCA-570, from the main menu select TASKS > EXPLORE
TASKS.
Select the RUN option. The list will now show only those tasks that have been performed. Select the desired
work order and press OK. The screen will show the report with the calibration points, the values obtained, how much
was expected, and the errors. If the error is above the value registered for the task, the line appears in red. If a
certificate is being issued, it will also show the value of the measurement uncertainty.
Fig. 50 - Task Results