Table of Contents
Advertisement
60
Entering the Configuration menu, in the CONFIG option, you can edit the graph's background color, line
color and thickness, sampling rate (in seconds) and configure the graph's x (time) and y (measurements) axes.
The collection of values can also be programmed to start at a certain date and time in the LOGGER option.
Configure the start and end time of the collection. During the selected period, the collected points are saved in an
internal file in the PCA-570.
To view a saved file press the OPEN button, select the desired file, and press LOAD. The file name contains
the date and time that the measurements were taken.
The SHEET button allows you to view the data in table format, with the date and time of the measurement,
and the measured values. If the user wants to export the current data to a .csv file that can be opened in spreadsheet
software, press the SAVE button and indicate the name and where it will be saved. The button
screenshot as a .png file. All saved screenshots can be viewed in the PICTURE menu. These files are saved on the
calibrator's internal SD card. If a USB stick is connected to the PCA 570, you can choose whether to save the file to
the SD card or to the USB stick.
To access the files saved in the calibrator, connect the USB cable to the computer (USB Type-A) and to the
PCA-570 (USB Type-B, see figures 02, 04 and 05, portable, Rack mount and desktop versions respectively).
Fig. 44 - Data Logger Configuration Menu
saves the current
Advertisement
Table of Contents
