Generation Or Output Functions - Presys PC-507-IS Technical Manual

Warning: Before each pressure measurement, it is necessary to keep the
sensor open to air and set the pressure indication to zero. Use the arrow key
to set pressures read by the input (IN option) to zero and the arrow key
pressures read by the output (OUT option) to zero.
Whenever the input signal (IN) is under or over the input ranges established in
item 2.2. - Specifications, the display will show UNDER or OVER, respectively.

3.5. Generation or Output Functions

Select through the menus the signal type to be generated and use the
corresponding terminals.
Fig. 08 – Pressure Measurement
Page 25
to set