Table of Contents
Advertisement
The CREATE DOCUMENT option saves the task data as a PDF file in the internal memory of the calibrator
68
(SD card), which can be printed or accessed via computer.
To print the Calibration Report or Certificate, press the printer icon
previously configured in SETTINGS > SYSTEM > PRINT CONF (see section 3.4) and must be connected to the USB
Host port of the PCA-570 (see figures 02, 04 and 05, Handheld, Rack Mounting and Desktop versions respectively).
To access the files saved on the calibrator's SD card, connect the USB cable to the computer (USB type A)
and to the PCA-570 (USB type B - Device, see Figures 02, 04 and 05, portable, Rack Mounting and Desktop
versions, respectively). The tasks are saved inside the TASKSREPORTS folder, identified by the registered TAG
number.
To save all tasks to a connected external hard drive or USB stick, go to TASKS > ADVANCED TASK
OPTIONS > EXPORT RESULTS TO PEN-DRIVE.
The logo can be changed to one of your own. To do this, plug a PENDRIVE with the logo file into the PCA-
570's USB port. Go to the menu TASKS > ADVANCED TASK OPTIONS > ADVANCED > CERTIFICATE MODEL
MANAGER > LOAD LOGO select the file by name (it must have the extension .jpg). We recommend an image size
close to 200 x 200 pixels.
To add your signature to the Report/Certificate, create a signed user in the System menu (see section 3.4 System)
and enable password-protected access.
. The printer must have been
Advertisement
Table of Contents
