Table of Contents
Advertisement
54
2.5.6. Full-Hart Configurator (FH Option)
If the HART® CONFIGURATOR option is enabled, the FH software starts. For this option, the instrument is
automatically found and the screen indicates the basic, universal and specific parameters (DD library).
To start the HART configurator you must wait for the PCA-570 to read all parameters from the instrument.
The PCA-570 will display the message: Reading device information. Please wait... Once connected, the bottom of
the screen will show the TAG, model of the connected instrument and the DD (Device Description) file used.
You can open the instrument's configuration tree, located in the left part of the screen. This tree changes
according to the instrument, as each Hart transmitter has its own specific commands.
Fig. 38 - Checking / Adjusting the mA output of the HART® transmitter
Advertisement
Table of Contents
