Table of Contents
Advertisement
b) CONV Function
35
Through the function CONV, PCA-570 can be convert any input signal to any output signal, with galvanic
isolation. It can, therefore behave like a real transmitter.
Once selected the input and the output of PCA-570, should fill the four parameters, showed in the following
graph.
The upper output value must always be higher than the lower output value. The upper and lower input
values must never be equal to each other. Therefore, any kind of direct or reverse retransmission from input to output
can be achieved.
Fig. 25 - CONV Function
Advertisement
Table of Contents
