Otto Bock C-Leg compact 3C96-1 Manual page 40

C-Leg®compact
Attachment of the Remote Control
The remote control can be:
1 attached to a key lanyard (Fig. 1);
2 attached to the belt of the prosthesis wearer with a clip (Fig. 2);
or
3 attached to a holder provided on the socket (integrated in the attached to a holder provided on the socket (integrated in the attached to a holder provided on the socket (integrated in the
laminate, attached with buckles or glued in place; Fig. 3).
Pairing (Establishing the Communication between the
C-Leg®compact and Remote Control)
Pairing does not have to be performed upon delivery. Pairing must
be done
• as soon as a new remote control (replacement) is used with the
C-Leg®compact.
• if a switch cannot be effected with fully charged batteries (of
both the joint and the remote control) within the working range
of the remote control (30–100 cm).
• upon receipt of the remote control with a new battery.
40
1
3
2