12.1 Neighbor Overview
The Neighbor screen allows you to view a summary and manage the Switch's neighboring devices. It
uses Layer Link Discovery Protocol (LLDP) to discover all neighbor devices connected to the Switch
including non-Zyxel devices. You can use this screen to perform tasks on the neighboring devices like
login, power cycle (turn the power off and then back on again), and reset to factory default settings.
This screen shows the neighboring device first recognized on an Ethernet port of the Switch. Device
information is displayed in gray when the neighboring device is offline.
12.1.1 What You Can Do
Use the Neighbor screen
neighbor devices.
Use the Neighbor Details screen
Switch's neighbor devices.
12.2 Neighbor
Click MONITOR > Neighbor to see the following screen.
Figure 61 MONITOR > Neighbor > Neighbor (example PoE model)
Chapter 12 Neighbor
(Section 12.2 on page
94) to view a summary and manage the Switch's
(Section 12.2.1 on page
GS1920v2 Series User's Guide
94
C
H A P T E R
Neighbor
95) to view more detailed information on the
12