Add/Edit Lldp-Med Network Policy - ZyXEL Communications GS1920v2 Series User Manual

Table 87 PORT > LLDP > LLDP MED > LLDP-MED Network Policy (continued)
LABEL
Add/Edit
Delete

31.9.1 Add/Edit LLDP-MED Network Policy

To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit
button.
Figure 128 PORT > LLDP > LLDP MED > LLDP-MED Network Policy > Add/Edit
The following table describes the labels in this screen.
Table 88 PORT > LLDP > LLDP MED > LLDP-MED Network Policy > Add/Edit
LABEL
Port
Application Type
Tag
VLAN
DSCP
Priority
Chapter 31 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
Click Add/Edit to add a new schedule rule or edit a selected one.
Select the rules that you want to remove, then click Delete.
DESCRIPTION
Enter the port number to set up the LLDP-MED network policy. You can enter multiple ports
separated by (no space) comma (",") or hyphen ("-") for a range. For example, enter "3-5"
for ports 3, 4, and 5. Enter "3,5,7" for ports 3, 5, and 7.
Select the type of application used in the network policy.
• voice
• voice-signaling
• guest-voice
• guest-voice-signaling
• softphone-voice
• video-conferencing
• streaming-video
• video-signaling
Select to tag or untag in the network policy.
• tagged
• untagged
Enter the VLAN ID number. It should be from 1 to 4094. For priority tagged frames, enter "0".
Enter the DSCP value of the network policy. The value is defined from 0 through 63 with the 0
representing use of the default DSCP value.
Enter the priority value for the network policy.
GS1920v2 Series User's Guide
188