Chapter 31 Link Layer Discovery Protocol (LLDP)
Figure 121 PORT > LLDP > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Dot1 and Dot3
TLV)
The following table describes the labels in the Dot1 and Dot3 parts of the screen.
Table 81 PORT > LLDP > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Dot1 and Dot3
TLV)
LABEL
DESCRIPTION
Dot1 TLV
Port VLAN ID
Port VLAN ID – This displays the VLAN ID of this port on the remote device.
TLV
Vlan Name TLV
This shows the VLAN ID and name for remote device port.
•
VLAN ID
•
VLAN Name
Protocol
Protocol ID – The Protocol Identity TLV allows the Switch to advertise the particular protocols
Identity TLV
that are accessible through its port.
Port-Protocol
This displays the IEEE 802.1 Port Protocol VLAN ID TLV, which indicates whether the VLAN ID
VLAN ID TLV
and whether it is enabled and supported on the port of remote Switch which sent the
LLDPDU.
•
Port-Protocol VLAN ID
•
Port-Protocol VLAN ID Supported
•
Port-Protocol VLAN ID Enabled
Dot3 TLV
GS1920v2 Series User's Guide
179