ZyXEL Communications GS1920v2 Series User Manual page 63

Table 11 Navigation Panel Links (continued)
LINK DESCRIPTION
NETWORKING
ARP Setup Click the link to unfold the following sub-link menu.
ARP This link takes you to a screen where you can configure ARP learning mode on a per-port basis.
Learning
DHCP Click the link to unfold the following sub-link menu.
DHCPv4 This link takes you to screens where you can view DHCPv4 relay status, mode, and configure
Relay
DHCPv4 relay settings.
DHCPv6 This link takes you to a screen where you can enable and configure DHCPv6 relay.
Relay
Static Routing Click the link to unfold the following sub-link menu.
IPv4 Static This link takes you to a screen where you can configure IPv4 static routes. A static route defines
Route
how the Switch should forward traffic by destination IP address and subnet mask.
SECURITY
AAA Click the link to unfold the following sub-link menu.
RADIUS This link takes you to a screen where you can configure your RADIUS (Remote Authentication Dial-
Server
In User Service) server settings for authentication.
Setup
TACACS+ This link takes you to a screen where you can configure your TACACS+ (Terminal Access Control-
Server
ler Access Control System Plus) server settings for authentication.
Setup
AAA Setup This link takes you to a screen where you can configure authentication, authorization and
accounting services through external servers. The external servers can be either RADIUS or
TACACS+ (Terminal Access Controller Access Control System Plus).
Access Control Click the link to unfold the following sub-link menu.
Service This link takes you to a screen where you can decide what services you may use to access the
Access
Switch.
Control
Remote This link takes you to a screen where you can specify a group of one or more "trusted computers"
Managem
from which an administrator may use a service to manage the Switch.
ent
Account This link takes you to a screen where you can configure account security settings on the Switch.
Security
ACL Click the link to unfold the following sub-link menu.
Classifier This link takes you to screens where you can configure the Switch to group packets based on the
specified criteria.
Policy Rule This link takes you to a screen where you can configure the Switch to perform special treatment
on the grouped packets.
Storm Control This link takes you to a screen to set up broadcast filters.
Errdisable This link takes you to a screens where you can view errdisable status and configure errdisable set-
tings in CPU protection, errdisable detect, and errdisable recovery.
IPv4 Source Click the link to unfold the following sub-link menu.
Guard
IP Source This link takes you to screens where you can configure filtering of unauthorized DHCP and ARP
Guard
packets in your network.
DHCP This link takes you to screens where you can view DHCP snooping database details and configure
Snooping
DHCP snooping settings on ports or VLANs. You can use DHCP snooping to filter unauthorized
DHCP packets on the network and to build the binding table dynamically.
ARP This link takes you to screens where you can view ARP inspection status, and configure ARP
Inspection
inspection settings on ports or VLANs. You can use ARP inspection to filter unauthorized ARP pack-
ets on the network.
Chapter 4 Web Configurator
GS1920v2 Series User's Guide
63