Add/Edit A Vlan Isolation Rule - ZyXEL Communications GS1920v2 Series User Manual

Figure 233
The following table describes the labels in this screen.
Table 174 SWITCHING > VLAN Isolation
LABEL
Index
Active
Name
VLAN ID
Promiscuous Ports
Add/Edit
Delete

50.2.1 Add/Edit a VLAN Isolation Rule

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN Isolation screen to display
this screen.
Figure 234
The following table describes the labels in this screen.
Table 175 SWITCHING > VLAN Isolation > Add/Edit
LABEL
Active
Name
VLAN ID
Promiscuous Ports
Chapter 50 VLAN Isolation
SWITCHING > VLAN Isolation
DESCRIPTION
This is the index number of the rule.
This shows whether this rule is activated or not.
This is the descriptive name for this rule.
This is the VLAN to which this rule is applied.
This shows the ports that can communicate with any ports in the same VLAN.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
SWITCHING > VLAN Isolation > Add/Edit
DESCRIPTION
Enable the switch button to enable VLAN Isolation in a VLAN.
Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ ,
]) for identification purposes.
Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule applies.
Enter the number of the ports that can communicate with any ports in the same VLAN.
Other ports belonging to this VLAN will be added to the isolation list and can only send and
receive traffic from the ports you specify here.
GS1920v2 Series User's Guide
320