Poe Setup; Chapter 33 Poe Setup; Poe Status (For Poe Models Only) - ZyXEL Communications GS1920v2 Series User Manual

33.1 PoE Status (for PoE models only)

Note: The following screens are available for the PoE models only. Some features are only
available for the Ethernet ports (1 to 8 for GS1920-8HPv2, 1 to 24 for GS1920-24HPv2, and
1 to 48 for GS1920-48HPv2).
The PoE models supports the IEEE 802.3at High Power over Ethernet (PoE) standard.
A powered device (PD) is a device such as an access point or a switch, that supports PoE (Power over
Ethernet) so that it can receive power from another device through an Ethernet port.
In the figure below, the IP camera and IP phone get their power directly from the Switch. Aside from
minimizing the need for cables and wires, PoE removes the hassle of trying to find a nearby electric
outlet to power up devices.
Figure 135 Powered Device Examples
You can also set priorities so that the Switch is able to reserve and allocate power to certain PDs.
Note: The PoE (Power over Ethernet) devices that supply or receive power and their
connected Ethernet cables must all be completely indoors.
PoE-Disabled Mechanism for GS1920-8HPv2
The GS1920-8HPv2 is a compact and fanless Switch capable of supplying Power over Ethernet (PoE).
Certain action will be taken when the temperature of the GS1920-8HPv2 reaches the temperature

Chapter 33 PoE Setup

C
GS1920v2 Series User's Guide
200
H A P T E R

PoE Setup

33