Configuration parameters
March 2023
Figure B-2: DD Menu Tree
Overview
Configure
Service Tools
B.2
Device setup
B.2.1
HART protocol
HART/polling address
The address range is 0 to 63. The transmitter operates in either standard mode with a 4–20
mA output signal or in multidrop. When the transmitter is in multi-drop mode, the current
output is fixed to 4 mA.
190
Status
Primary Purpose Variables
Device Information
Identification
Revisions
Alarm and Security
Upgrade
Guided Setup
Basic Setup
Verify Level
Manual Setup > Device Setup
HART
Units
Analog Output
Display
Security
Device Information
Manual Setup > Level Setup
Geometry
Environment
Volume
Scaled Variable
Antenna
Advanced
Alert Setup
Measurement Recovery
Signal Quality Alert
High User Defined Alert
Low User Defined Alert
Alerts
Variables
Mapped Variables
Process
Device
Signal Quality
Maintenance
Routine Maintenance
Reset/Restore
Echo Tuning
Thresholds
Echo Peaks
Suppress
Simulate Measurement Values
Simulate
Analog Out > Loop test
Reference Manual
00809-0100-4408
Reference Manual