Table of Contents
Advertisement
B)
Before starting
Check following steps in order to ensure the correct function of OCPP 1.6:
Go to the Setup Web-page > 'Integrations' tab > 'General' tab
Once in 'General' section, Public IP source establishes where the Charge Point must
obtain the public IP address in order to send it later to the back-end. Different values
can be selected:
Choose the option selected under 'Public IP source' according to your network
topology.
When done, please do not forget to save changes using 'Apply' button just below the
option selected.
77
Advertisement
Table of Contents
Need help?
Do you have a question about the Master-Satellite and is the answer not in the manual?
Questions and answers