Circontrol Master-Satellite User Manual page 47

4.8 Disconnect the MCB inside the Charge Point in order to do a hard reset over the
modem and the HMI screen, after 10 seconds switch ON again the MCB.
4.9 Repeat again the points 4.2 and 4.3 explained above:
4.2 - look for modem access point and connect on it.
4.3 - log on modem webpage with authentication.
4.10 Now, go again to Status > Network > LAN > DHCP Leases and confirm that the
information written at the point 4.7 has been successfully recorded:
Description - the name given for Charge Point
MAC address - the MAC of the Charge Point
IP address - 192.168.1.50
47