Circontrol Master-Satellite User Manual page 39

Use the following parameters when prompted for authentication, and then either
click Log in.
User name: admin; Password: Admin001
In order to change the password, remember to adjust it in
Charge Point side, as explained in section 6.
You have now successfully logged, from here on you can configure almost any aspect
of your router.
4.4 Configuration Wizard will start after logging in. It is necessary to complete
Configuration Wizard to setup modem to the correct mode.
Go to Status > Network > Mobile and pay attention to 'Sim card state' field, it has to
be Inserted.
39