Circontrol Master-Satellite User Manual page 48

4.11 Go to Network > Firewall > Port Forwards > Add new instance
The ports that you can see in the table below are introduced in the modem by
default, although only the named 50000 and 9191 are enabled:
Name Protocol
80 TCP
8080 TCP
50000 TCP
9191 TCP
If necessary, it is possible to enable the other ports or introduce them following the
table listed above.
Push over 'Save & Apply' button after any modification.
48
External port
(S) Internal IP
80 192.168.1.50
8080 192.168.1.50
50000 192.168.1.50
9191 192.168.1.1
CIRCONTROL — Master-Satellite User Manual
Internal port
(S)
80
8080
50000
80