Use
61
7.18 Additional options
The product may be equipped with additional options:
•
Clinical mounting kit
•
Mounting kit for head support attachment
•
Lateral thoracic supports (can only be used with adjustable back support upholstery)
•
Seat cushion from the current seat cushion range
7.19 Disassembly and transport
NOTICE
Deformation when folded
Damage to the product, problems unfolding due to unallowable loads
► Never place heavy objects on the folded product.
INFORMATION
► When transporting the wheelchair in vehicles, fold it up and remove the wheels and leg supports if necessary.
► Follow the IATA (International Air Transport Association) rules and those of the relevant airline when trans
porting the wheelchair in an aircraft. Inform the airline several days before your flight. Use the SSR (special
service request) codes to describe the type of limited mobility if necessary. You can for example research
these on the Internet.
The wheelchair must be prepared for transport in a passenger vehicle.
1) Fold up the foot plates (see Page 17).
2) Swing away the leg supports, remove and set aside (see Page 18).
3) If necessary: Detach the seat cushion from the hook-and-loop fastener (see Page 20).
4) Pull up the seat upholstery until the wheelchair folds together (see fig. 62).
5) Fasten the safety strap (see fig. 63).
6) Remove the drive wheels (see Page 26).
7) Place the disassembled wheelchair in the vehicle.
62
36
63
Start M4 XXL, Start M6 Junior