Push Handles; Adjusting The Height Of The Push Handles; Removing The Push Handles - Otto Bock Start M4 XXL Instructions For Use Manual

Use
2) Move the arm support to the desired rotation setting.
3) Let go of the release button. The arm support will be secured in its position.
Continuously adjusting the rotation setting
1) Pull the release button downwards (see fig. 36, item 1).
2) Turn the release button 90°. The arm support can be rotated freely in this position.
3) Move the arm support to the desired rotation setting.
4) Let go of the release button. The arm support will be secured in its position.
Adjusting the depth of the arm support
1) Loosen the Allen head screws under the arm support (see fig. 36, item 2).
2) Slide the arm support to the desired depth.
3) Re-tighten the Allen head screws under the arm support (see fig. 36, item 2).
35

7.7 Push handles

The push handles make pushing the wheelchair easier for the attendant.
Some of the push handle designs allow the height to be adjusted to suit the needs of the attendant.

7.7.1 Adjusting the height of the push handles

The height of the push handles on the wheelchair ("telescoping" push handle: see fig. 37; "height-adjustable,
removable" push handle: see fig. 38) can be adjusted to make pushing easier for the attendant.
1) Release the clamping lever.
2) Adjust the height of the push handle.
3) Close the clamping lever tightly.
→ Both push handles must be adjusted to the same height.
37

7.7.2 Removing the push handles

Push handles of the "height-adjustable, removable" type can be removed from the back support tube when
needed.
24
36
38
Start M4 XXL, Start M6 Junior