Additional Options; Disassembly And Transport - Otto Bock Motus CV Instructions For Use Manual

76

7.17 Additional options

The product may be equipped with additional options.
The options are firmly mounted to the product by qualified personnel or the manufacturer and are pre-adjusted by
qualified personnel at delivery.

7.18 Disassembly and transport

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding the wheelchair out or together, only grip by the specified components.
NOTICE
Deformation when folded
Damage to the product, problems unfolding due to unallowable loads
► Never place heavy objects on the folded product.
INFORMATION
► When transporting the wheelchair in vehicles, fold it up and remove the wheels and leg supports if necessary.
► Follow the IATA (International Air Transport Association) rules and those of the relevant airline when trans­
porting the wheelchair in an aircraft. Inform the airline several days before your flight. Use the SSR (special
service request) codes to describe the type of limited mobility if necessary. You can for example research
these on the Internet.
The wheelchair must be prepared for transport in a passenger vehicle.
1) Fold up the foot plates (see page 17).
2) Motus CV only: Swing away the leg supports, detach and set aside (see page 16).
3) If necessary: Detach the seat cushion from the hook-and-loop fastener (see fig. 8).
4) Pull up the seat upholstery until the wheelchair folds together (see fig. 77).
5) Fasten the safety strap (see fig. 4).
6) Detach the drive wheels (see page 28).
7) Place the disassembled wheelchair in the vehicle (see fig. 78).
Motus CV, Motus CS
Use
37