Otto Bock Start M4 XXL Instructions For Use Manual page 40

Use
• The stickers that identify the front fixation points are found above the caster attachment device on each side:
see fig. 69.
• The stickers that identify the rear fixation points are found on the central unit behind the lower end of the back
support tube on each side: see fig. 70.
69
Attaching the belt loops
1) Position the product in the vehicle for transporting persons with reduced mobility. For more information, please
refer to section 5 in the brochure "Transporting persons with reduced mobility", order number 646D158.
2) Front fixation points: Attach one belt loop around each of the frame tubes on the left and right, wrapping
them around the frame tubes at the marked position once or twice depending on the length (example: see
fig. 71, item 1).
3) Engage the hook of the respective vehicle side wheelchair restraint belt in the belt loop (see fig. 71, item 2).
4) Rear fixation points: Attach one belt loop around each of the back support tubes on the left and right at the
marked position (example: see fig. 72, item 1).
5) Engage the hook of the respective vehicle side wheelchair restraint belt in the belt loop (see fig. 72, item 2).
6) Tighten the vehicle side wheelchair restraint belts at the front and rear as firmly as possible.
→ The product showing the correct positioning of the attachment straps (see fig. 73).
71
40
70
72
Start M4 XXL, Start M6 Junior