Labels - Guardian Fall Protection 00432 Instruction Manual

Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment
must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize
the likelihood of fall hazards, and the correct use of personal fall arrest systems.
NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless
explicitly certified for such use.
Equipment subjected to forces of fall arrest must immediately be removed from use.
Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a doctor if there
is any reason to doubt a user's ability to withstand and safely absorb fall arrest forces or perform set-up of
equipment. Pregnant women and minors must not use this equipment.
Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall suspension
may result in serious injury or death. Use trauma relief straps to reduce the effects of suspension trauma.

Labels

7
1-800-466-6385
INSPECTION
www.guardianfall.com
Truss Boss Anchor
User must inspect prior
Part #:
to EACH use. Competent
Person must complete
formal inspection
Date of Manufacture: every 12 months.
Competent Person to
inspect and initial.
Serial #:
Date of First Use:
________________
Prior to use, read
and understand all
Product lifetime is
manufacturer's
indefinite as long as
instructions equipment passes pre-use
provided with and Competent Person
equipment at
time of shipment.
Compliant with
OSHA 1910 and
J
OSHA 1926 Subpart M
regulations.
F
Materials:
Zinc-plated steel.
M
Capacity Range:
A
130-420 lbs. (including
all equipment).
M
All PFAS equipment
must be selected and
J
deemed compatible
with Truss Boss Anchor J
by Competent Person.
A
Only make compatible
connections. Refer to
S
instructions for proper
connection methods.
O
! WARNING
N
MAXIMUM 1
D
connection per anchor.
Avoid contact with
hazards, including, but
fails inspection,
not limited to, heat,
IMMEDIATELY REMOVE
chemicals, electricity,
FROM SERVICE
and sharp or abrasive
edges and surfaces.
90077 (Rev. E)
REMOVE LABELS
GRID
inspections.
If equipment
DO NOT
85095 (Rev. C)